Home | All Classes | Main Classes | Annotated | Grouped Classes | Functions

TQNetworkProtocol Class Reference
[network module]

The TQNetworkProtocol class provides a common API for network protocols. More...

#include <ntqnetworkprotocol.h>

Inherits TQObject.

Inherited by TQFtp, TQHttp, and TQLocalFs.

List of all member functions.

Public Members

Signals

Static Public Members

Protected Members


Detailed Description

The TQNetworkProtocol class provides a common API for network protocols.

This is a base class which should be used for network protocols implementations that can then be used in TQt (e.g. in the file dialog) together with the TQUrlOperator.

The easiest way to implement a new network protocol is to reimplement the operation*() methods, e.g. operationGet(), etc. Only the supported operations should be reimplemented. To specify which operations are supported, also reimplement supportedOperations() and return an int that is OR'd together using the supported operations from the TQNetworkProtocol::Operation enum.

When you implement a network protocol this way, it is important to emit the correct signals. Also, always emit the finished() signal when an operation is done (on success and on failure). TQt relies on correctly emitted finished() signals.

For a detailed description of the TQt Network Architecture and how to implement and use network protocols in TQt, see the TQt Network Documentation.

See also Input/Output and Networking.


Member Type Documentation

TQNetworkProtocol::ConnectionState

When the connection state of a network protocol changes it emits the signal connectionStateChanged(). The first argument is one of the following values:

TQNetworkProtocol::Error

When an operation fails (finishes unsuccessfully), the TQNetworkOperation of the operation returns an error code which has one of the following values:

You should also use these error codes when implementing custom network protocols. If this is not possible, you can define your own error codes by using integer values that don't conflict with any of these values.

TQNetworkProtocol::Operation

This enum lists the possible operations that a network protocol can support. supportedOperations() returns an int of these that is OR'd together. Also, the type() of a TQNetworkOperation is always one of these values.

TQNetworkProtocol::State

This enum contains the state that a TQNetworkOperation can have.


Member Function Documentation

TQNetworkProtocol::TQNetworkProtocol ()

Constructor of the network protocol base class. Does some initialization and connecting of signals and slots.

TQNetworkProtocol::~TQNetworkProtocol () [virtual]

Destructor.

void TQNetworkProtocol::addOperation ( TQNetworkOperation * op ) [virtual]

Adds the operation op to the operation queue. The operation will be processed as soon as possible. This method returns immediately.

bool TQNetworkProtocol::autoDelete () const

Returns TRUE if auto-deleting is enabled; otherwise returns FALSE.

See also TQNetworkProtocol::setAutoDelete().

bool TQNetworkProtocol::checkConnection ( TQNetworkOperation * op ) [virtual protected]

For processing operations the network protocol base class calls this method quite often. This should be reimplemented by new network protocols. It should return TRUE if the connection is OK (open); otherwise it should return FALSE. If the connection is not open the protocol should open it.

If the connection can't be opened (e.g. because you already tried but the host couldn't be found), set the state of op to TQNetworkProtocol::StFailed and emit the finished() signal with this TQNetworkOperation as argument.

op is the operation that needs an open connection.

Example: network/networkprotocol/nntp.cpp.

void TQNetworkProtocol::clearOperationQueue () [virtual]

Clears the operation queue.

void TQNetworkProtocol::connectionStateChanged ( int state, const TQString & data ) [signal]

This signal is emitted whenever the state of the connection of the network protocol is changed. state describes the new state, which is one of, ConHostFound, ConConnected or ConClosed. data is a message text.

void TQNetworkProtocol::createdDirectory ( const TQUrlInfo & i, TQNetworkOperation * op ) [signal]

This signal is emitted when mkdir() has been succesful and the directory has been created. i holds the information about the new directory. op is the pointer to the operation object which contains all the information about the operation, including the state, etc. Using op->arg( 0 ), you can get the file name of the new directory.

When a protocol emits this signal, TQNetworkProtocol is smart enough to let the TQUrlOperator, which is used by the network protocol, emit its corresponding signal.

void TQNetworkProtocol::data ( const TQByteArray & data, TQNetworkOperation * op ) [signal]

This signal is emitted when new data has been received after calling get() or put(). op holds the name of the file from which data is retrieved or uploaded in its first argument, and the (raw) data in its second argument. You can get them with op->arg( 0 ) and op->rawArg( 1 ). op is the pointer to the operation object, which contains all the information about the operation, including the state, etc.

When a protocol emits this signal, TQNetworkProtocol is smart enough to let the TQUrlOperator (which is used by the network protocol) emit its corresponding signal.

void TQNetworkProtocol::dataTransferProgress ( int bytesDone, int bytesTotal, TQNetworkOperation * op ) [signal]

This signal is emitted during the transfer of data (using put() or get()). bytesDone is how many bytes of bytesTotal have been transferred. bytesTotal may be -1, which means that the total number of bytes is not known. op is the pointer to the operation object which contains all the information about the operation, including the state, etc.

When a protocol emits this signal, TQNetworkProtocol is smart enough to let the TQUrlOperator, which is used by the network protocol, emit its corresponding signal.

void TQNetworkProtocol::finished ( TQNetworkOperation * op ) [signal]

This signal is emitted when an operation finishes. This signal is always emitted, for both success and failure. op is the pointer to the operation object which contains all the information about the operation, including the state, etc. Check the state and error code of the operation object to determine whether or not the operation was successful.

When a protocol emits this signal, TQNetworkProtocol is smart enough to let the TQUrlOperator, which is used by the network protocol, emit its corresponding signal.

TQNetworkProtocol * TQNetworkProtocol::getNetworkProtocol ( const TQString & protocol ) [static]

Static method to get a new instance of the network protocol protocol. For example, if you need to do some FTP operations, do the following:
    TQFtp *ftp = TQNetworkProtocol::getNetworkProtocol( "ftp" );
    
This returns a pointer to a new instance of an ftp implementation or null if no protocol for ftp was registered. The ownership of the pointer is transferred to you, so you must delete it if you don't need it anymore.

Normally you should not work directly with network protocols, so you will not need to call this method yourself. Instead, use TQUrlOperator, which makes working with network protocols much more convenient.

See also TQUrlOperator.

bool TQNetworkProtocol::hasOnlyLocalFileSystem () [static]

Returns TRUE if the only protocol registered is for working on the local filesystem; returns FALSE if other network protocols are also registered.

void TQNetworkProtocol::itemChanged ( TQNetworkOperation * op ) [signal]

This signal is emitted whenever a file which is a child of this URL has been changed, e.g. by successfully calling rename(). op holds the original and the new file names in the first and second arguments, accessible with op->arg( 0 ) and op->arg( 1 ) respectively. op is the pointer to the operation object which contains all the information about the operation, including the state, etc.

When a protocol emits this signal, TQNetworkProtocol is smart enough to let the TQUrlOperator, which is used by the network protocol, emit its corresponding signal.

void TQNetworkProtocol::newChild ( const TQUrlInfo & i, TQNetworkOperation * op ) [signal]

This signal is emitted if a new child (file) has been read. TQNetworkProtocol automatically connects it to a slot which creates a list of TQUrlInfo objects (with just one TQUrlInfo i) and emits the newChildren() signal with this list. op is the pointer to the operation object which contains all the information about the operation that has finished, including the state, etc.

This is just a convenience signal useful for implementing your own network protocol. In all other cases connect to the newChildren() signal with its list of TQUrlInfo objects.

void TQNetworkProtocol::newChildren ( const TQValueList<TQUrlInfo> & i, TQNetworkOperation * op ) [signal]

This signal is emitted after listChildren() was called and new children (files) have been read from the list of files. i holds the information about the new children. op is the pointer to the operation object which contains all the information about the operation, including the state, etc.

When a protocol emits this signal, TQNetworkProtocol is smart enough to let the TQUrlOperator, which is used by the network protocol, emit its corresponding signal.

When implementing your own network protocol and reading children, you usually don't read one child at once, but rather a list of them. That's why this signal takes a list of TQUrlInfo objects. If you prefer to read just one child at a time you can use the convenience signal newChild(), which takes a single TQUrlInfo object.

void TQNetworkProtocol::operationGet ( TQNetworkOperation * op ) [virtual protected]

When implementing a new network protocol, this method should be reimplemented if the protocol supports getting data; this method should then process the TQNetworkOperation.

When you reimplement this method it's very important that you emit the correct signals at the correct time (especially the finished() signal after processing an operation). Take a look at the TQt Network Documentation which describes in detail how to reimplement this method. You may also want to look at the example implementation in examples/network/networkprotocol/nntp.cpp.

op is the pointer to the operation object which contains all the information on the operation that has finished, including the state, etc.

Example: network/networkprotocol/nntp.cpp.

TQNetworkOperation * TQNetworkProtocol::operationInProgress () const

Returns the operation, which is being processed, or 0 of no operation is being processed at the moment.

void TQNetworkProtocol::operationListChildren ( TQNetworkOperation * op ) [virtual protected]

When implementing a new network protocol, this method should be reimplemented if the protocol supports listing children (files); this method should then process this TQNetworkOperation.

When you reimplement this method it's very important that you emit the correct signals at the correct time (especially the finished() signal after processing an operation). Take a look at the TQt Network Documentation which describes in detail how to reimplement this method. You may also want to look at the example implementation in examples/network/networkprotocol/nntp.cpp.

op is the pointer to the operation object which contains all the information on the operation that has finished, including the state, etc.

Example: network/networkprotocol/nntp.cpp.

void TQNetworkProtocol::operationMkDir ( TQNetworkOperation * op ) [virtual protected]

When implementing a new network protocol, this method should be reimplemented if the protocol supports making directories; this method should then process this TQNetworkOperation.

When you reimplement this method it's very important that you emit the correct signals at the correct time (especially the finished() signal after processing an operation). Take a look at the TQt Network Documentation which describes in detail how to reimplement this method. You may also want to look at the example implementation in examples/network/networkprotocol/nntp.cpp.

op is the pointer to the operation object which contains all the information on the operation that has finished, including the state, etc.

void TQNetworkProtocol::operationPut ( TQNetworkOperation * op ) [virtual protected]

When implementing a new network protocol, this method should be reimplemented if the protocol supports putting (uploading) data; this method should then process the TQNetworkOperation.

When you reimplement this method it's very important that you emit the correct signals at the correct time (especially the finished() signal after processing an operation). Take a look at the TQt Network Documentation which describes in detail how to reimplement this method. You may also want to look at the example implementation in examples/network/networkprotocol/nntp.cpp.

op is the pointer to the operation object which contains all the information on the operation that has finished, including the state, etc.

void TQNetworkProtocol::operationRemove ( TQNetworkOperation * op ) [virtual protected]

When implementing a new network protocol, this method should be reimplemented if the protocol supports removing children (files); this method should then process this TQNetworkOperation.

When you reimplement this method it's very important that you emit the correct signals at the correct time (especially the finished() signal after processing an operation). Take a look at the TQt Network Documentation which is describes in detail how to reimplement this method. You may also want to look at the example implementation in examples/network/networkprotocol/nntp.cpp.

op is the pointer to the operation object which contains all the information on the operation that has finished, including the state, etc.

void TQNetworkProtocol::operationRename ( TQNetworkOperation * op ) [virtual protected]

When implementing a new newtork protocol, this method should be reimplemented if the protocol supports renaming children (files); this method should then process this TQNetworkOperation.

When you reimplement this method it's very important that you emit the correct signals at the correct time (especially the finished() signal after processing an operation). Take a look at the TQt Network Documentation which describes in detail how to reimplement this method. You may also want to look at the example implementation in examples/network/networkprotocol/nntp.cpp.

op is the pointer to the operation object which contains all the information on the operation that has finished, including the state, etc.

void TQNetworkProtocol::registerNetworkProtocol ( const TQString & protocol, TQNetworkProtocolFactoryBase * protocolFactory ) [static]

Static method to register a network protocol for TQt. For example, if you have an implementation of NNTP (called Nntp) which is derived from TQNetworkProtocol, call:
    TQNetworkProtocol::registerNetworkProtocol( "nntp", new TQNetworkProtocolFactory<Nntp> );
    
after which your implementation is registered for future nntp operations.

The name of the protocol is given in protocol and a pointer to the protocol factory is given in protocolFactory.

void TQNetworkProtocol::removed ( TQNetworkOperation * op ) [signal]

This signal is emitted when remove() has been succesful and the file has been removed. op holds the file name of the removed file in the first argument, accessible with op->arg( 0 ). op is the pointer to the operation object which contains all the information about the operation, including the state, etc.

When a protocol emits this signal, TQNetworkProtocol is smart enough to let the TQUrlOperator, which is used by the network protocol, emit its corresponding signal.

void TQNetworkProtocol::setAutoDelete ( bool b, int i = 10000 ) [virtual]

Because it's sometimes hard to take care of removing network protocol instances, TQNetworkProtocol provides an auto-delete mechanism. If you set b to TRUE, the network protocol instance is removed after it has been inactive for i milliseconds (i.e. i milliseconds after the last operation has been processed). If you set b to FALSE the auto-delete mechanism is switched off.

If you switch on auto-delete, the TQNetworkProtocol also deletes its TQUrlOperator.

void TQNetworkProtocol::setUrl ( TQUrlOperator * u ) [virtual]

Sets the TQUrlOperator, on which the protocol works, to u.

See also TQUrlOperator.

void TQNetworkProtocol::start ( TQNetworkOperation * op ) [signal]

Some operations (such as listChildren()) emit this signal when they start processing the operation. op is the pointer to the operation object which contains all the information about the operation, including the state, etc.

When a protocol emits this signal, TQNetworkProtocol is smart enough to let the TQUrlOperator, which is used by the network protocol, emit its corresponding signal.

void TQNetworkProtocol::stop () [virtual]

Stops the current operation that is being processed and clears all waiting operations.

int TQNetworkProtocol::supportedOperations () const [virtual]

Returns an int that is OR'd together using the enum values of TQNetworkProtocol::Operation, which describes which operations are supported by the network protocol. Should be reimplemented by new network protocols.

Example: network/networkprotocol/nntp.cpp.

TQUrlOperator * TQNetworkProtocol::url () const

Returns the TQUrlOperator on which the protocol works.

This file is part of the TQt toolkit. Copyright © 1995-2007 Trolltech. All Rights Reserved.


Copyright © 2007 TrolltechTrademarks
TQt 3.3.8